|
Mark: Very good Use this nif file though. Theirs is broke. I reported it and the fix but it doesn't look like they updated it.
[PCM100]
Type = NDIS
Title = "Linksys EtherFast 10/100 integrated PC Card"
Version = 3.0
Drivername = LE100$
Xports = NETBEUI LANDD
[FILE]
Name = PCM100.OS2
Path = IBMCOM\\MACS
; Parameter start
[netaddress]
tag = NETADDRESS
display = "Network adapter address"
type = Hexstring
Strlength = 12
optional = YES
editable = YES
help = "This parameter overrides the network address of the network adapter card. The value of this parameter is a hexadecimal string of 12 gigits, as in 020001020304. The address must be unique among all other network adapter addresses on the network."
[interrupt]
tag = INTERRUPT
display = "Interrupt [IRQ]"
Type = Decimal
Default = 9
Set = 3,4,5,9,10,11,12,15
Scope = Local
Optional = No
Editable = Yes
Virtual = No
Help = "This parameter speficies the interrupt line [IRQ] that the adapter uses. The valid interrupt lines are IRQ3, IRQ4, IRQ5, IRQ9, IRQ10, IRQ11, IRQ12, and IRQ15."
[IOADDRESS]
tag = IOADDRESS
display = "I/O Base Address"
type = Hexadecimal
default = 0300
set = 0240,0280,0300,0320,0340,0360
scope = Local
Optional = No
Editable = Yes
Virtual = No
Help = "This parameter specifies the I/O base address for the card. The valid addresses are 240h, 280h, 300h, 320h, 340h, and 360h."
[BASEMEMORY]
tag = BASEMEMORY
display = "BASEMEMORY"
type = Hexadecimal
default = 0dc00
set = 0c800,0cc00,0d000,0d400,0d800,0dc00
scope = Local
Optional = yes
Editable = Yes
Virtual = No
Help = "This parameter specifies the basememory for the card. The valid addresses are 0c800, 0cc00, 0d000, 0d400, 0d800, 0dc00."
Information is sent by: Andy Willis -- 2003-03-01 23:34:22
****************************************
[GoogleAdv]
|
Test the program:
|
How to accelerate read/write to USB flashdisk? FAQ -> Q7
|
Comments: Lorne Tyndale 
2005-08-08 23:12:15 | I have used both a Version 3 and a Version 2 of this card. I found that Version 3 would not work under Warp3 and 4, yet Version 2 worked fine. Problem may have been fixed with eCS, never tried V3 with eCS. |
|
